ROOTVG - AIX & POWER Portal

IVM 3 digit LED

Home

Help

Login

Register

	Welcome, Guest. Please login or register.	July 30, 2010, 12:47:06 PM
		Login with username, password and session length

ROOTVG > AIX > Virtualization > IVM 3 digit LED

Pages: [1] Go Down

« previous next »

Print

	Author	Topic: IVM 3 digit LED (Read 2243 times)
0 Members and 1 Guest are viewing this topic.

sjoerdhooft

Jr. Member

Posts: 8

Re: IVM 3 digit LED

« Reply #1 on: July 01, 2009, 01:55:57 PM »

Ok, my fault, the LED code is viewable in IVM as the Reference Code. In my case it displays only "Starting Kernel", but I tried to install the LPAR with another NIM server and the codes appears... so it seems my freshly installed NIM needs a little work...


	Logged

sjoerdhooft

Jr. Member

Posts: 8

IVM 3 digit LED

« on: July 01, 2009, 12:55:03 PM »

Hey everyone,

I have a running VIOS with IVM and have creates some LPARs in it. First one should be a new NIM server, and second one should be NIM client. NIM server seems to be running, all checks are ok, so I created the NIM client. It starts up, counts the tftp packets, displays the AIX welcome screen and just waits there. Nothing more... After looking into the NIM redbook I learned that NIM should set a 3 digit LED code, to determine where the problem lies. Problem is, I can't find the 3 digit LED code. It's running on a JS22 blade on a bladecenter H.
I had a similar issue once on another blade, but without the whole VIOS/IVM/LPAR setup, just a blade installation. In that case, the "blade service data" provides the 3 digit LED code, in this case however, no luck there.

Does anyone know how to solve this?